WING TAPE

Wing tape is available in four colors, white, red, yellow and transparent. The tape is a 3M product featuring a vinyll backing with a soft adhesive. It is easily applied, holds well and is easily removed. This tape is best suited for holding wings to fuselages or for joining tip panels to wings. Tape is not suitable for hinging control surfaces.

This tape is priced at $5.00 per roll (36 yards x 1 inch) plus shipping (usually $1.50) and tax in California. Please order by part number.

Red HL5051 - White HL5052 - Yellow HL5053 - Transparent - HL5054

 

 

[email order] [home]

HINGE TAPE

 

This tape has been used for many years on high performance slope racers, F3B and TD models. It is designed to be used as a single tape sysstem (tape on one side of the control surface) and with Mylar Gap Seal.

Please note this tape is not fuel proof and is intended for sailplanes and electric models. Order part # HL 501. The cost is $5.00 plus shipping for a 10 ft x 1 inch roll.

[email order] [home]

SUPER STICKY HINGE TAPE

This is the stickest tape in the world! A super sticky tape with a thin backing that makes it ideal for hand launch and park flier models. It is also optimum for "double taping" control surfaces on thermal duration, scale and electric models. The tape is not fuel proof.

Tape is available in 36 yard x 3/4 inch rolls at $10.00 plus shipping and tax in California. Please order part # HL 5011.

[email order] [Home]

GAP SEAL

Gap seal is used to seal the open slot on controll surfaces when they are deflected. Ideal for covering the slot in the upper edge of flaps on thermal duration models. the adhesive is only applied to half of the tape while the other half is clear. Also useful in reducing drag on slope racers and pylon racers. Tape is not fuel proof.

Gap seal is available in 10 foot x 1 inch rolls priced at $5.00 plus shipping and tax in California. Please order part # HL 502

[email order] [home

REFLECTIVE TAPE

This tape is designed to be applied to the wing leading edge to give a brief "flash" as the model is turned through the sun. Helps in keeping models in sight at long range.

Tape is 1 inch wide and is packaged in 10 foot rolls for $3.00 plus shipping and tax in California. Longer lengths are available and are priced at $ .30 per foot. Please order part # HL 5021.

[email order] [home]